Default Settings and Technical Specifications
405
NETGEAR ProSAFE VPN Firewall FVS318G v2
Physical and Technical Specifications
The following table shows the physical and technical specifications for the VPN firewall:
Administrative and monitoring settings
Secure HTTP management Enabled
Telnet management Disabled
Traffic meter Disabled
SNMP Disabled
Time zone GMT
Time zone adjusted for daylight saving time Disabled
Routing logs Disabled
System Logs Disabled
Other event logs Disabled
Email logs Disabled
Syslogs Disabled
IPSec VPN logs Enabled
Table 87. VPN firewall physical and technical specifications
Feature Specification
Network protocol and standards compatibility
Data and Routing Protocols TCP/IP, R
IP-1, RIP-2, PPP over Ethernet (PPPoE),
DHCP, DHCPv6
Power plug (localized to the country of sale)
North America 120V, 60 Hz, input
Unit
ed Kingdom, Australia 240V, 50 Hz, input
Europe 230V, 50 Hz, input
Input, for all regions 12 VDC @ 1A output
Dimensions and weight
Dimensions (W x H x D) 19 x 12.5 x 3.5 cm (7.5 X 4.9 X 1.4 in.)
Weight 0.59 kg (1.3 lb)
Table 86. VPN firewall factory default configuration settings (continued)
Feature Default Behavior
To Next Page
Loading...
Need help?
General
Weight and Dimensions
