NETGEAR FVS318G User Manual

Default Settings and Technical Specifications
404
NETGEAR ProSAFE VPN Firewall FVS318G v2
VPN IPSec Wizard: IKE policy settings for IPv4 gateway-to-client tunnels
Exchange mode Aggressive
ID type FQDN
Local WAN ID remote.com
Remote WAN ID local.com
Encryption algorithm 3DES
Authentication algorithm SHA-1
Authentication method Pre-shared key
Key group DH-Group 2 (1024 bit)
Lifetime Eight hours
VPN IPSec Wizard: VPN policy setting
s for IPv4 gateway-to-client tunnels
Encryption algorithm 3DES
Authen
tication algorithm SHA-1
Life time One hour
Key group DH-Group 2 (1024 bit)
NetBIOS Disabled
RADIUS settings
Primary RADIUS server Disable
d
and none configured
Secondary RADIUS server Disabled and none configured
RADIUS time-out period 30 seconds
RADIUS maximum retry count Four
User, group, and domain settings
default domain geardomain
default group geardomain
default users, default passwords
admin, password
guest, password
Table 86. VPN firewall factory default configuration settings (continued)
Feature Default Behavior

NETGEAR FVS318G Specifications

General

Power requirements	12V DC, 1.5A
Firewall throughput	250 Mbit/s
Maximum data transfer rate	1000 Mbit/s
HTTP performance	6000 transactions/sec
Wi-Fi	No
DHCP server	Yes
Number of VLANs	256
VPN tunnels quantity	12
WAN connection	Ethernet (RJ-45)
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	9
Ethernet DMZ ports quantity	1
Routing protocols	RIP-1, RIP-2
Supported network protocols	TCP/IP, UDP, ICMP, PPPoE
VPN support	IPsec (ESP), IKE, PKI, HTTPS
Security algorithms	128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, MD5, SHA-1
Internal memory	128 MB
Flash memory	32 MB
Storage media type	Flash
Processor frequency	300 MHz
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Cables included	LAN (RJ-45)

Weight and Dimensions

Weight	590 g
Dimensions (WxDxH)	190 x 125 x 35 mm