IPv4 and IPv6 Internet and Broadband Settings
42
NETGEAR ProSAFE VPN Firewall FVS318G v2
8. To verify the connection, click the Status option arrow in the upper right of the screen.
The Connection Status screen shows a valid IP address and gateway,
and you are
connected to the Internet. If the configuration was not successful, see Troubleshoot the
ISP Connection on page
389.
For more information about the Connection Status screen, see View the WAN Port Status
on page 373.
Configure a Static IPv6 Internet Connection
To configure a static IPv6 or PPPoE IPv6 Internet connection, you must enter the IPv6
address information that you received from your ISP.
To configure static IPv6 broadband ISP settings:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Network
Confi
guration > WAN Settings > Broadband ISP Settings.
The Broadband ISP Settings screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
