Firewall Protection
169
NETGEAR ProSAFE VPN Firewall FVS318G v2
You can also configure the QoS profile to maximize the throughput. See the example in the
following figure.
Figure 15. Example of outbound firewall rule
Configure Other Firewall Features
You can configure attack checks, set session limits, and manage the application-level
gateway (ALG) for SIP sessions.
This section contains the following topics:
• Attack Checks
• Set Limits for IPv4 Sessions
• Manage the Application Level Gateway for SIP Sessions
Attack Checks
You can specify whether the VPN firewall is protected against common attacks in the DMZ,
LAN, and WAN networks. The various types of IPv4 attack checks are listed on the Attack
Checks screen and defined in Table 31 on page 17
0. For IPv6, the only options are to specify
whether to allow a ping on the WAN port and whether to allow VPN p
ass-through for IPSec.
IPv4 Attack Checks
To enable IPv4 attack checks for your network environment:
1. Log in to the unit:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
