Manage Users, Authentication, and VPN Certificates
299
NETGEAR ProSAFE VPN Firewall FVS318G v2
2. Select Users > Users.
The Users screen displays.
3. In the List of Users table, select the check box to the left of
each user account that you want
to delete or click the Select All table button to select all accounts.
4. Click the Del
ete table button.
The information is deleted.
Set User Login Policies
You can restrict the ability of defined users to log in to the VPN firewall’s web management
interface. You can also require or prohibit logging in from certain IP addresses or from
particular browsers.
This section contains the following topics:
• Configure Login Policies
• Configure Login Restrictions Based
on IPv4
Addresses
• Configure Login Restrictions Based on IPv6
Addresses
• Configure Login Restrictions Based on Web Browser
Configure Login Policies
To configure user login policies:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Users
>
Users.
The Users screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
