NETGEAR FVS318G User Manual

348
8
8. Monitor System Access and
Performance
This chapter describes the system-monitoring features of the VPN firewall. You can be alerted to
important events such WAN traffic limits reached, login failures, and attacks. You can also view
status information about the firewall, WAN ports, LAN ports, active VPN users and tunnels, and
more. In addition, the diagnostics utilities are described. The chapter contains the following
sections:
• Enable the WAN Traffic Meter
• Configure Logging, Alerts, and Event Notifications
• View the Status
• Diagnostics Utilities
All log and report functions that are part of the Firewall Logs &
E-mail screen and some of the
functions that are part of the Diagnostics screen require that you configure the email
notification server. For more information, see Configure Logging, Alerts, and Event
Notifications on p
age 353.

NETGEAR FVS318G Specifications

General

Power requirements	12V DC, 1.5A
Firewall throughput	250 Mbit/s
Maximum data transfer rate	1000 Mbit/s
HTTP performance	6000 transactions/sec
Wi-Fi	No
DHCP server	Yes
Number of VLANs	256
VPN tunnels quantity	12
WAN connection	Ethernet (RJ-45)
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	9
Ethernet DMZ ports quantity	1
Routing protocols	RIP-1, RIP-2
Supported network protocols	TCP/IP, UDP, ICMP, PPPoE
VPN support	IPsec (ESP), IKE, PKI, HTTPS
Security algorithms	128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, MD5, SHA-1
Internal memory	128 MB
Flash memory	32 MB
Storage media type	Flash
Processor frequency	300 MHz
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Cables included	LAN (RJ-45)

Weight and Dimensions

Weight	590 g
Dimensions (WxDxH)	190 x 125 x 35 mm