LAN Configuration
80
NETGEAR ProSAFE VPN Firewall FVS318G v2
• Configure the RADVD.
For more information, see Configure the IPv6 Router Advertisement Daemon and
Advertisement Prefixes for the LAN on
p
age 88.
• Optionally, manually add prefixes to the List of Prefixes for Prefix Dele
gation table on
the LAN Setup screen for IPv6.
For more information, see IPv6 LAN Prefixes for Prefix Delegation on
p
age 86.
• Optionally, manually add prefixes to List of Prefixes to Advertise
table on the RADVD
screen.
For more information, see Advertisement Prefixes for the LAN on p
age 90.
Stateful DHCPv6 Server
The IPv6 clients in the LAN obtain an interface IP address, configuration information such as
DNS server information, and other parameters from the DHCPv6 server. The IP address is a
dynamic address. For stateful DHCPv6, you must configure IPv6 address pools. For more
information, see IPv6 LAN Address Pools on p
age 83.
Configure the IPv6 LAN
To configure the IPv6 LAN settings:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Network Confi
guration > LAN Setup.
The LAN Setup screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
