EasyManuals Logo

NETGEAR FVS318G User Manual

NETGEAR FVS318G
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #292 background imageLoading...
Page #292 background image
Manage Users, Authentication, and VPN Certificates
292
NETGEAR ProSAFE VPN Firewall FVS318G v2
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Use
r
s > Domains.
The Domains screen displays.
3. In the Action column of the List of Domains table, for the domain
that you want to edit, click
the Edit table button.
The Edit Domains screen displays. This screen
is similar to the Add Domains screen.
4. Modify the settings as described in T
able 66 on page 289. You cannot modify the Domain
Name and Authen
tication Type fields.
5. Click the Appl
y button.
Your changes are saved.
Configure Groups
The use of groups simplifies the configuration of VPN policies when different restrictions and
access controls apply to different sets of users. It also simplifies the configuration of web
access exception rules. Like the default domain of the VPN firewall, the default group is also
named geardomain. The default group geardomain is assigned to the default domain
geardomain. You cannot delete the default domain geardomain, nor its associated default
group geardomain.
IPSec VPN and L2TP users do not belong to a domain and are not assigned to
a group.
For information about LAN groups, see Manage IPv4 Groups and Hosts (IPv4 LAN Groups)
on page 71.
IMPORTANT:
When you create a domain on the Domains screen (see Create
Domains on page 287
), a group with the same name as the new
domain is created automatically. You cannot delete such a group.
However
, when you delete the domain with which it is associated,
the group is deleted automatically.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR FVS318G and is the answer not in the manual?

NETGEAR FVS318G Specifications

General IconGeneral
Power requirements12V DC, 1.5A
Firewall throughput250 Mbit/s
Maximum data transfer rate1000 Mbit/s
HTTP performance6000 transactions/sec
Wi-FiNo
DHCP serverYes
Number of VLANs256
VPN tunnels quantity12
WAN connectionEthernet (RJ-45)
Connectivity technologyWired
Ethernet LAN (RJ-45) ports9
Ethernet DMZ ports quantity1
Routing protocolsRIP-1, RIP-2
Supported network protocolsTCP/IP, UDP, ICMP, PPPoE
VPN supportIPsec (ESP), IKE, PKI, HTTPS
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, MD5, SHA-1
Internal memory128 MB
Flash memory32 MB
Storage media typeFlash
Processor frequency300 MHz
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Weight590 g
Dimensions (WxDxH)190 x 125 x 35 mm

Related product manuals