NETGEAR FVS318G - Page 291

Manage Users, Authentication, and VPN Certificates
291
NETGEAR ProSAFE VPN Firewall FVS318G v2
6. If you use local authentication, make sure that it is not disabled: in the Local Authentication
section of the Domain screen, select the No radio button.
A combination of local and external authentication is supported.
WARNING:
If you disable local authentication, make sure that at least one
external administrative user is specified; otherwise, access to the
VPN firewall is blocked.
7. Click the Apply button.
Your changes are saved.
Delete Domains
You cannot delete the geardomain default domain.
 To delete one or more domains:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Users
>
Domains.
The Domains screen displays.
3. In the List of Domains table, select the check box to the left of
each domain that you want to
delete or click the Select All table button to select all domains.
4. Click the Del
ete table button.
The information is deleted.
Edit Domains
You cannot edit the geardomain default domain.
 To edit a domain:
1. Log in to the unit: