Firewall Protection
189
NETGEAR ProSAFE VPN Firewall FVS318G v2
3. In the Custom IP Groups table to the right of the service that you want to edit, click the Edit
table button.
4. Modify the settings that you wish to change.
See T
able 37 on page 188.
5. Click the Ap
ply button.
Your changes are saved.
To delete a custom IP group:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select S
e
curity > IP Groups.
The IP Groups screen displays.
3. In the Custom IP Groups table, select the check box to the left of each custom IP group that
yo
u want to delete or click the Select All table button to select all groups.
4. To delete the selected profile or profiles, click the Delete
table button.
The information is deleted.
Configure Content Filtering
To restrict access to certain sites on the Internet by internal LAN users, you can use the
content filtering and web component blocking features of the VPN firewall. By default, these
features are disabled; all requested traffic from any website is allowed. If you enable one or
more of these features and users try to access a blocked site, they see a “Blocked by
NETGEAR” message.
Note: Content filtering is supported for IPv4 users and groups only. Filtering
is limited to HTTP traffic. HTTPS traffic cannot be filtered.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
