Monitor System Access and Performance
373
NETGEAR ProSAFE VPN Firewall FVS318G v2
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select S
e
curity > Port Triggering.
3. In the upper right of the screen, click the St
atus option arrow.
The Port Triggering Status screen displays the information that is described in the
f
ollowing table:
View the WAN Port Status
You can view the status of the IPv4 and IPv6 WAN connections, the DNS servers, and the
DHCP servers.
Table 83. Port Triggering Status screen information
Item Description
# The sequence number of the rule onscreen.
Rule The
name of the port triggering rule that is associated with this entry.
LAN IP Address The IP address of the computer or device that is using this rule.
Open Ports The incoming ports that are associated with this rule. Incoming traffic using one of
these ports is sent to the IP address that is listed in the LAN IP Address field.
Time Remaining The time remaining before this rule is released and made available for other
computers or devices. This timer is restarted when incoming or outgoing traffic is
received.
To Next Page
Loading...
