NETGEAR FVS318G - Page 374

Monitor System Access and Performance
374
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv4 WAN Port Status
 To view the IPv4 status of the WAN port:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Network
Confi
guration > WAN Settings > Broadband ISP Settings (IPv4).
The Broadband ISP Settings (IPv4) screen displays.
3. In the upper right of the screen, click the Broad
band Status option arrow.
The type of connection determines the information that is displayed on t
he Connection
Status screen. The screen can display the information that is described in the following
table:
Table 84. Connection Status screen information for an IPv4 connection
Item Description
Connection Time The period that the VPN firewall is connected through the WAN port.
Connection Type The connection type can be either DHCP or Static IP.
Connection Status The connection status can be either Connected or Disconnected.