EasyManuals Logo

NETGEAR FVS318G User Manual

NETGEAR FVS318G
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Introduction
18
NETGEAR ProSAFE VPN Firewall FVS318G v2
temperatures for the VPN firewall, see Appendix A, Default Settings and Technical
Specifications.
Wall-Mount the VPN Firewall with the Mounting Kit
Use the mounting kit for the VPN firewall to install the appliance on a wall. Attach the
mounting brackets using the hardware that is supplied with the mounting kit.
Figure 5. Wall mounting
Before mounting the VPN firewall to a wall, verify the following:
• You are using the correct screws (supplied with the installation kit).
• The wall on wh
ich you plan to mount the VPN firewall is suitably located.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR FVS318G and is the answer not in the manual?

NETGEAR FVS318G Specifications

General IconGeneral
Power requirements12V DC, 1.5A
Firewall throughput250 Mbit/s
Maximum data transfer rate1000 Mbit/s
HTTP performance6000 transactions/sec
Wi-FiNo
DHCP serverYes
Number of VLANs256
VPN tunnels quantity12
WAN connectionEthernet (RJ-45)
Connectivity technologyWired
Ethernet LAN (RJ-45) ports9
Ethernet DMZ ports quantity1
Routing protocolsRIP-1, RIP-2
Supported network protocolsTCP/IP, UDP, ICMP, PPPoE
VPN supportIPsec (ESP), IKE, PKI, HTTPS
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, MD5, SHA-1
Internal memory128 MB
Flash memory32 MB
Storage media typeFlash
Processor frequency300 MHz
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Weight590 g
Dimensions (WxDxH)190 x 125 x 35 mm

Related product manuals