LAN Configuration
100
NETGEAR ProSAFE VPN Firewall FVS318G v2
4. Click the Apply button.
Your changes are saved.
DMZ Port for IPv6 Traffic
You can set up the DMZ port for IPv6 traffic. You can enable or disable the hardware DMZ
port (LAN port 8; see Front Panel on page 13
) for IPv6 traffic and configure an IPv6 address
and prefix length for the DMZ port.
The IPv6 clients in the DMZ can autoconfigure their own IPv6 addr
ess or obt
ain an IPv6
address through a DHCPv6 server.
For the DMZ, two DHCPv6 server options are available:
• Stateless DHCPv6 server.
The IPv6 clients in the DMZ generate their own IP address by
using a combination of locally available information and router advertisements but receive
DNS server information from the DHCPv6 server.
Enable LDAP
information
To enable the DHCP server to provide Lightweight Directory Access Protocol
(LDAP) server information, select the Enable LDAP information check box. Enter
the following settings.
LDAP Server The IP address or name of the LDAP server.
Search Base The search objects that specify the location in the directory tree
from which the LDAP search begins. You can specify multiple
search objects, separated by commas. The search objects
include the following:
• CN
(for common name)
• OU (for organizational unit)
• O (for organization)
• C (for country)
• DC (for domain)
For examp
le, to search the Netgear.net domain for all last
names of Johnson, you would enter
cn=Johnson,dc=Netgear,dc=net
Port The port number for the LDAP server. The default setting is 0
(zero).
DNS Proxy
Enable DNS Proxy This setting is optional. To enable the VPN firewall to provide a LAN IP address for
DNS address name resolution, select the Enable DNS Proxy check box. This
check box is selected by default.
Note: When the DNS Proxy option is disabled, all DHCP clients receive the DNS IP
addresses of the ISP but without the DNS proxy IP address.
Table 18. DMZ Setup screen settings for IPv4 (continued)
Setting Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
