LAN Configuration
101
NETGEAR ProSAFE VPN Firewall FVS318G v2
For stateless DHCPv6, you must configure the RADVD and advertisement prefixes. For
more information, see Configure the IPv6 Router Advertisement Daemon and
Advertisement Prefixes for the DMZ on p
age 106.
• Stateful DHCPv6 server.
The IPv6 clients in the DMZ obtain an interface IP address,
configuration information such as DNS server information, and other parameters from the
DHCPv6 server.
The IP address is a dynamic address. For stateful DHCPv6, you mus
t configure IPv6
address pools. For more information, see IPv6 DMZ Address Pools on p
age 104.
To enable and configure the DMZ port for IPv6 traffic:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network
Con
figuration > DMZ Setup.
The DMZ Setup screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
