LAN Configuration
102
NETGEAR ProSAFE VPN Firewall FVS318G v2
3. In the upper right of the screen, select the IPv6 radio button.
4. Enter the settings as described in the following table:
Table 19. DMZ Setup screen settings for IPv6
Setting Description
DMZ Port Setup
Do you want to
enable DMZ Port?
Select one of the following radio buttons:
• Yes.
Enables you to configure the DMZ port settings. Complete the IP
Address and Subnet Mask fields.
• No. Allows you to disable the DMZ port after you configure it.
IPv6 Add
ress Enter the IP address of t
he DMZ port. Make sure that the DMZ
port IP address, LAN port IP address, and WAN port IP
address are in different subnets. The default IP address for the
DMZ port is 176::1.
Prefix Length Enter the IPv6 prefix length, for example, 10 or 64. The default
prefix length for the DMZ port is 64.
To Next Page
Loading...
