Introduction
17
NETGEAR ProSAFE VPN Firewall FVS318G v2
Bottom Panel with Product Label
The product label on the bottom of the VPN firewall’s enclosure displays factory default
settings, regulatory compliance, and other information.
Figure 4. Product label
Choose a Location for the VPN Firewall
The VPN firewall is suitable for use in an office environment where it can be freestanding (on
its runner feet) or mounted on a wall. Alternatively, you can rack-mount the VPN firewall in a
wiring closet or equipment room.
Consider the following when deciding where to position the VPN fire
wa
ll:
• The unit is accessible, and cables can be connected easily.
• Cabling is away from sources of electrical noise. These include lift shafts, microwave
o
vens, and air-conditioning units.
• Water or moisture cannot enter the case of the unit.
• Airflow around th
e unit and through the vents in the side of the case is not restricted.
Provide a minimum of 25 mm or 1 inch clearance.
• The air is as free of dust as possible.
• Temperature operating limits are not likely to be exceeded. Inst
all the unit in a clean,
air-conditioned environment. For information about the recommended operating
To Next Page
Loading...
Need help?
General
Weight and Dimensions
