LAN Configuration
117
NETGEAR ProSAFE VPN Firewall FVS318G v2
With this configuration, if you attempt to access a device on the 134.177.0.0 remote network,
the VPN firewall forwards your request to the ISP. In turn, the ISP forwards your request to
the remote network, where the request is likely to be denied by the remote network’s firewall.
In this case, you must define a static route, informing the VPN
f
irewall that the 134.177.0.0 IP
address is to be accessed through the local LAN IP address (192.168.1.100).
The static route on the VPN firewall must be defined as follows:
• T
he destination IP address and IP subnet mask must specify that
the static route applies
to all 134.177.x.x IP addresses.
• The gateway IP address must specify that all traffic for the 134.
177.x.x IP addresses is
forwarded to the local LAN IP address (192.168.1.100).
• A metric value of 1 will work sin
ce the VPN firewall is on the local LAN.
• The static route can be made private only as a precautionary secu
rity measure in case
RIP is activated.
Manage Static IPv6 Routing
NETGEAR’s implementation of IPv6 does not support RIP next generation (RIPng) to
exchange routing information, and dynamic changes to IPv6 routes are not possible. To
enable routers to exchange information over a static IPv6 route, you must manually configure
the static route information on each router.
To add an IPv6 static route to the Static Route table:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network
Con
figuration > Routing.
The Static Routing screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
