NETGEAR FVS318G User Manual

Monitor System Access and Performance
381
NETGEAR ProSAFE VPN Firewall FVS318G v2
• Display the Routing Tables
• Capture Packets in Real Time
• Reboot the VPN Firewall Remotely
Send a Ping Packet
Use the ping utility to send a ping packet request to check the connection between the VPN
firewall and a specific IP address or FQDN. If the request times out (no reply is received), it
usually means that the destination is unreachable. However, some network devices can be
configured not to respond to a ping. The ping results are displayed on a new screen.
 To send a ping:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Monitoring
> Diagnostics.
The Diagnostics screen displays the IPv4 settings.
3. Specify the IP version for the screen that you want:
• For IPv4, in the IP
Address / Domain Name field of the Ping or Trace an IP Address
section, enter the IP address or domain name that you want to ping.
• For IPv6, in the Domain Name fie
ld, enter the domain name that you want to ping.
You cannot enter an IP address.
4. If
the specified address is reached through a VPN tunnel, select
the Ping through VPN
tunnel? check box and then select a VPN policy from the Select VPN Policy list.
5. Click the Pin
g button.
The results of the ping are displayed in a new screen.
To return to the Diagnostics screen, on the browser menu bar, click the Back bu
tton.
Trace a Route
A traceroute lists all routers between the source (the VPN firewall) and the destination IP
address.

NETGEAR FVS318G Specifications

General

Power requirements	12V DC, 1.5A
Firewall throughput	250 Mbit/s
Maximum data transfer rate	1000 Mbit/s
HTTP performance	6000 transactions/sec
Wi-Fi	No
DHCP server	Yes
Number of VLANs	256
VPN tunnels quantity	12
WAN connection	Ethernet (RJ-45)
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	9
Ethernet DMZ ports quantity	1
Routing protocols	RIP-1, RIP-2
Supported network protocols	TCP/IP, UDP, ICMP, PPPoE
VPN support	IPsec (ESP), IKE, PKI, HTTPS
Security algorithms	128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, MD5, SHA-1
Internal memory	128 MB
Flash memory	32 MB
Storage media type	Flash
Processor frequency	300 MHz
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Cables included	LAN (RJ-45)

Weight and Dimensions

Weight	590 g
Dimensions (WxDxH)	190 x 125 x 35 mm