Virtual Private Networking Using IPSec and L2TP Connections
283
NETGEAR ProSAFE VPN Firewall FVS318G v2
5. Click the Apply button.
Your changes are saved.
View the Active L2TP Users
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select VPN
>
Connection Status > L2TP Active Users.
The List of L2TP Active Users table lists each active connection with the informatio
n that
is described in the following table.
Authentication
Select one or more of the following authentication methods to authenticate L2TP users:
• PAP.
RADIUS-Password Authentication Protocol (PAP).
• CHAP. RADIUS-Cha
llenge Handshake Authentication Protocol (CHAP).
• MSCHAP. RADIUS-Microsoft CHAP (MSCHAP).
• MSCHAPv2.
RADIUS-Microsoft CHAP version 2 (MSCHAPv2).
Table 64. L2TP Active Users screen information
Item Description
Username The name of the L2TP user that you defined (see Configure User Accounts on
page 295
).
Remote IP The client’s IP address on the remote LAC.
Table 63. L2TP Server screen settings (continued)
Setting Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
