IPv4 and IPv6 Internet and Broadband Settings
28
NETGEAR ProSAFE VPN Firewall FVS318G v2
2. Select Network Configuration > WAN Settings.
3. Select the NA
T radio button or the Classical Routing radio button.
Changing the WAN mode causes all LAN WAN and DMZ WAN
inbound rules to revert to default settings.
4. Click the Apply button.
Your settings are saved.
Let the VPN Firewall Automatically Detect and
Configure an IPv4 Internet Connection
To automatically configure the WAN port for an IPv4 connection to the Internet:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.