Firewall Protection
158
NETGEAR ProSAFE VPN Firewall FVS318G v2
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Sec
uri
ty > Firewall > LAN DMZ Rules.
The LAN DMZ Rules screen displays.
3. Select the IPv6
radio button.
The screen displays the IPv6 settings.
4. Click the Add
table button under the Outbound Services table.
5. Enter the settings as described in T
able 29 on page 128.
In addition to selections from the Service, Action, and Log list
s, you must make
selections from the following lists:
• LAN U
sers
• DMZ Users
Unless your selectio
n from the Action
list is BLOCK always, you also must make a
selection from the Select Schedule list.
6. Click
the Appl
y button.
Your changes are saved.
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you did not define any
rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is blocked.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
