Firewall Protection
159
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv4 LAN DMZ Inbound Service Rules
To create an IPv4 LAN DMZ inbound rule:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security >
Firewall > LAN DMZ Rules.
The LAN DMZ Rules screen displays. The IPv4 radio butto
n is selected by default. The
screen displays the IPv4 settings.
3. Click
the Ad
d table button under the Inbound Services table.
4. Enter the settings as described in T
able 30 on page 131.
In addition to selections from the Service, Action, and
Log lists, you must make
selections from the following lists:
• LA
N Users
• DMZ Users
To Next Page
Loading...
