Default Settings and Technical Specifications
403
NETGEAR ProSAFE VPN Firewall FVS318G v2
QoS profiles Normal-Service
Minimize-Cost
Maximize-Reliability
Maximize-Throughput
Minimize-Delay
Content filtering Disabled
Proxy server blocking Disabled
Java applets blocking Disabled
ActiveX controls blocking Disabled
Cookies blocking Disabled
Blocked keywords None
Trusted domains All
VPN IPSec Wizard: IKE policy settings for IPv4 and IPv6 gateway-to-gateway tunnels
Exchange mode Main
ID type Local WAN IP address
Local WAN ID Local WAN IP address
Remote WAN ID Not applicable
Encryption algorithm 3DES
Authentication algorithm SHA-1
Authentication method Pre-shared key
Key group DH-Group 2 (1024 bit)
Lifetime Eight hours
VPN IPSec Wizard: VPN pol
ic
y settings for IPv4 and IPv6 gateway-to-gateway tunnels
Encryption algorithm 3DES
Authentication algorithm SHA-1
Life time One hour
Key group DH-Group 2 (1024 bit)
NetBIOS Enabled
Table 86. VPN firewall factory default configuration settings (continued)
Feature Default Behavior