Firewall Protection
205
NETGEAR ProSAFE VPN Firewall FVS318G v2
3. In the IP/MAC Bindings table to the right of the IP/MAC binding that you want to edit, click
the Edit table button.
The Edit IP/MAC Binding screen displays.
4. Modify the settings that you wish to change.
See T
able 39 on page 204. Y
ou can change the MAC address, IPv6 address, and
logging status.
5. Click
the Ap
ply button.
Your changes are saved.
To remove one or more IP/MAC bindings from the table:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security >
Address Filter > IP/MAC Binding.
The IP/MAC Binding screen displays.
3. Select the check box to the left of each IP/MAC binding that you want to delete or click the
Sele
ct All table button to select all bindings.
4. Click the Del
ete table button.
The information is deleted.
To change the IPv6 MAC polling interval from its default setting of 10 seconds:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
To Next Page
Loading...
