Virtual Private Networking Using IPSec and L2TP Connections
239
NETGEAR ProSAFE VPN Firewall FVS318G v2
2. The IKE policy that is specified in the Auto Policy Parameters section of the Add VPN Policy
screen for the VPN policy is used to start negotiations with the remote VPN gateway.
3. An IKE session is established, using the security association (SA)
settings that are specified
in a matching IKE policy, and the following happens:
• Keys a
nd other settings are exchanged.
• An IPSec SA is established, using the settings that are specified in the VPN policy
.
The VPN tunnel is then available for data transfer.
When you use the VPN Wizard to set up a
VPN tu
nnel, an IKE policy is established and
populated in the List of IKE Policies and is given the same name as the new VPN connection
name. You can also edit exiting policies or add new IKE policies from the IKE Policies screen.
IKE Policies
To access the IKE Policies list:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select VPN
> IPSec VPN.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
