Virtual Private Networking Using IPSec and L2TP Connections
246
NETGEAR ProSAFE VPN Firewall FVS318G v2
6. Click the Apply button.
Your changes are saved.
To edit an IKE policy:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
Extended Authentication
XAUTH Configuration
Note: For more
information about
XAUTH and its
authentication modes,
see Configure XAUTH
for VPN Clients on
page 257.
Select whether Extended Authentication (XAUTH) is enabled, and, if enabled,
which device is used to verify user account information:
• No
ne.
XAUTH is disabled. This the default setting.
• Edge Device.
The VPN firewall functions as a VPN concentrator on which
one or more gateway tunnels terminate. The authentication modes that are
available for this configuration are User Database, RADIUS PAP, or RADIUS
CHAP.
• IPSec
Host. The VPN firewall functions as a VPN client of the remote
g
ateway. In this configuration, the VPN firewall is authenticated by a remote
gateway with a user name and password combination.
Authentication
Typ
e
For an Edge Device configuration, from the list, select the
authentication type:
• User Database.
XAUTH occurs through the VPN
firewall’s user database. You can add users on the Add
User screen (see User Database Configuration on
page 259).
• Radius PAP.
XAUTH occurs through RADIUS Password
Authentication Protocol (PAP). The local user database is
first checked. If the user account is not present in the
local user database, the VPN firewall connects to a
RADIUS server. For more information, see RADIUS Client
and Server Configuration on
p
age 259.
• Radius CHAP.
XAUTH occurs through RADIUS
Challenge Handshake Authentication Protocol (CHAP).
For more information, see RADIUS Client and Server
Configuration on p
age 259.
Username The user name for XAUTH.
Password The password for XAUTH.
Table 51. Add IKE Policy screen settings (continued)
Setting Description
To Next Page
Loading...
