Virtual Private Networking Using IPSec and L2TP Connections
263
NETGEAR ProSAFE VPN Firewall FVS318G v2
3. Under the List of Mode Config Records table, click the Add table button.
4. Complete
the settings as described in the following table.
Table 56. Add Mode Config Record screen settings
Setting Description
Client Pool
Record Name A descriptive name of the Mode Config record for identification and management
purposes.
First Pool Assign at least one range of IP pool addresses in the First Pool fields to enable the
VPN firewall to allocate these to remote VPN clients. The Second Pool and Third
Pool fields are optional. To specify any client pool, enter the starting IP address for
the pool in the Starting IP field, and enter the ending IP address for the pool in the
Ending IP field.
Note: Make sure that no IP pool is within the range of the local network IP
addresses. Use a different range of private IP addresses such as 172.16.xxx.xx.
Second Pool
Third Pool
WINS Server If the local network includes a WINS serve, enter its IP address in the Primary field.
You can enter the IP address of a second WINS server in the Secondary field.
DNS Server Enter the IP address of the DNS server that is used by remote VPN clients in the
Primary field. You can enter the IP address of a second DNS server in the
Secondary field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
