Virtual Private Networking Using IPSec and L2TP Connections
265
NETGEAR ProSAFE VPN Firewall FVS318G v2
Under the List of IKE Policies table, click the Add table button.
7. The Add IKE Policy screen displays the IPv4 settings.
8. Specify the IP version for which you want to add an IKE policy:
• IPv4. In th
e upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step 9.
• IPv6. Sele
ct the IPv6 radio button.
The Add IKE Policy screen for IPv6 displays. This screen is identical to the Ad
d IKE
Policy screen for IPv4 (see the next figure).
You can configure an IPv6 IKE policy to assign IPv4 addresses to clie
nt
s, but you
cannot assign IPv6 addresses to clients.
9. On the Add IKE Policy screen, complete the settings as described in the following table.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
