Manage Users, Authentication, and VPN Certificates
307
NETGEAR ProSAFE VPN Firewall FVS318G v2
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Users
>
Users.
The Users screen displays.
3. In the Action column of the List of Users table, for the user for
which you want to modify the
settings, click the Edit table button.
4. Change the settings as described in the following table:
5. Click the Ap
ply button.
Table 71. Edit User screen settings
Setting Description
Select User
Typ
e
From the list, select one of the predefined user types that determines the access
credentials:
• Administrator. User
with full access and the capacity to change the VPN firewall
configuration (that is, read/write access).
• Guest (readonly).
User who can only view the VPN firewall configuration (that is,
read-only access).
• IPSEC VPN User.
You cannot change an existing user from the IPSEC VPN User
type to another type or from another type to the IPSEC VPN User type.
• L2TP User.
You cannot change an existing user from the L2TP User type to another
type or from another type to the L2TP User type.
Check to Edit
Password
Select this check box to make the password fields accessible to modify the password.
Enter Your Password Enter the password with which you logged in.
New Password Enter the new password.
Confirm New Password Reenter the new password for confirmation.
Idle Timeout The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 5 minutes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
