NETGEAR FVS318G - Page 330

Network and System Management
330
NETGEAR ProSAFE VPN Firewall FVS318G v2
• IPv6. Select the IPv6 radio button.
4. Enter the settings as described in the following table:
Table 73. Remote Management screen settings for IPv4 and IPv6
Setting Description
Secure HTTP Management
Allow Secure HTTP
Managemen
t?
To enable secure HTTP management, select the Yes radio button, which is the
default setting. To disable secure HTTP management, select the No radio button.
Select the addresses through which access is allowed:
• Everyone.
No IP addresses are restricted.
• IP address range. Only users who use devices in the specified IP address range
can
securely manage over an HTTP connection. In the From fields, type the start
IP address of the range; in the To fields, type the end IP address of the range.
• Only this PC. Only a user who uses the device with the specified IP address can
securel
y manage over an HTTP connection. Type the IP address in the fields.