Network and System Management
337
NETGEAR ProSAFE VPN Firewall FVS318G v2
5. Click the Apply button.
Your changes are saved.
To configure the SNMP system information:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select A
d
ministration > SNMP.
Security Level From the list, select the security level for communication between the SNMPv3
user and the SNMP agent that collects the MIB objects from the VPN firewall:
• NoAuthNoPriv.
Both authentication and privacy are disabled. This is the
default setting.
• AuthNoPriv.
Authentication is enabled but privacy is disabled. Make a
selection from the Authentication Algorithm list and enter an
authentication password.
• AuthPriv.
Authentication and privacy are enabled. Make a selection from
the Authentication Algorithm list and enter an authentication password. In
addition, make a selection from the Privacy Algorithm list and enter a
privacy password.
Authentication Algorithm From the list, select the protocol for a
u
thenticating an SNMPv3 user:
• MD5. Message Digest 5. This is a hash algorithm that produces a 128-b
it
digest.
• SHA1. Secure Hash Algorithm 1. This is a hash algorithm that produces
a
160-bit digest.
Authentication Password The authentication password that an SNMPv3 user must enter to be granted
access to the SNMP agent that collects the MIB objects from the VPN firewall.
Privacy Algorithm From the list, select the encryption method for the communication between an
SNMPv3 user and the SNMP agent that collects the MIB objects from the VPN
firewall:
• DES.
Data Encryption Standard.
• AES. Advanced Encryption Standard.
Privacy Password The privacy password that an SNMPv3 user must enter to allow decryption of
the MIB objects that the SNMP agent collects from the VPN firewall.
Table 75. Edit User screen settings for SNMPv3 users (continued)
Setting Description
To Next Page
Loading...
