Network and System Management
346
NETGEAR ProSAFE VPN Firewall FVS318G v2
2. Select Administration > Time Zone.
The bottom of the screen display the current weekday, date, time, t
ime zone, and year (in
the example in the previous figure: Current Time: Tue Mar 6 22:48:17 GMT-0800 2012).
3. Enter
the settings as described in the following table:
Table 77. Time Zone screen settings
Setting Description
Date/Time From the list, select the local time zone in which the VPN
firewall operates. The
correct time zone is required for scheduling to work correctly.
Automatically Adjust for
Daylight Savings Time
If daylight saving time is supported in your region, select the Automatically
Adjust for Daylight Savings Time check box. By default, the check box is
cleared.
Force IPv6 address
resolution for servers
Select this check box to force the use of IPv6 addresses and FQDN (domain
name) resolution in the Server 1 Name / IP Address and Server 2 Name / IP
Address fields when you select the Use Custom NTP Servers radio button.
NTP Servers (default or
custom)
Select a NTP server option:
• Use
Default NTP Servers. The VPN firewall regularly updates its RTC by
contacting a default NETGEAR NTP server on the Internet.
• Use Custom NTP Servers.
The VPN firewall regularly updates its RTC by
contacting one of two custom NTP servers (primary and backup), both of
which you must specify in the fields that become available with this
selection.
Note: If you select the Use
Custom NTP Servers option but leave either the
Server 1 or Server 2 field blank, both fields are set to the default NETGEAR NTP
servers.
Note: A list of public NTP servers is available at
http://support.ntp.org/bin/view/Servers/WebHome.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
