NETGEAR FVS318G - Page 70

LAN Configuration
70
NETGEAR ProSAFE VPN Firewall FVS318G v2
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
d. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select Network
Confi
guration > LAN Setup > LAN Multi-homing.
The Available Secondary LAN IPs table displays the secondary LAN IP
addresses added
to the VPN firewall.
3. In the Add Secondary LAN IP Address section, enter the following
settings:
• IP Address. Enter the secondary addre
ss that you want to assign to the LAN ports.
• Subnet Mask. En
ter the subnet mask for the secondary IP address.
4. To add the secondary IP address to the Available Secondary LAN IPs
table, in the rightmost
column, click the Add table button.
5. Repeat St
ep 3 and Step 4 for each secondary IP address that you want to add to the
Available Secondary LAN IPs table.
 To edit a secondary LAN IP address:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.