NETGEAR ProSAFE SRX5308 - Page 123

Security Mode Configuration Commands
123
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
lan_user group_wise group name The name of the LAN group or LAN
IP group. The LAN group name is
either a default name (Group1,
Group2, Group3, and so on) or a
custom name that you have
specified with the net lan
lan_groups edit <row id>
<new group name> command. The
LAN IP group name is a name that
you have specified with the security
services ip_group add command.
The address_wise and
group_wise keywords are
mutually exclusive.
For an inbound rule, this option is
available only when the WAN mode
is Classical Routing.
wan_users address_wise ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
Specifies the type of WAN address.
The address_wise and
group_wise keywords are
mutually exclusive.
wan_user_start_ip ipaddress There are two options:
• The IP address if the wan_user
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
wan_user keyword is set to
ADDRESS_RANGE.
wan_user_end_ip ipaddress The end IP address if the
wan_user keyword is set to
ADDRESS_RANGE.
wan_users group_wise group name The name of the WAN IP group.
The WAN IP group name is a name
that you have specified with the
security services ip_group add
command.
The address_wise and
group_wise keywords are
mutually exclusive.
QoS profile, logging, and bandwidth profile
qos_profile profile name The name of the QoS profile that
you have specified with the security
services qos_profile add command.
Keyword (might consist of two
separate words)
Associated Keyword to Select or
Parameter to Type
Description