Security Mode Configuration Commands
172
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Related show command: show security address_filter ip_or_mac_binding setup
security address_filter ip_or_mac_binding delete <row id>
This command deletes an IP/MAC binding rule by deleting its row ID.
Related show command: show security address_filter ip_or_mac_binding setup
security address_filter ip_or_mac_binding enable_email_log <ip version>
This command configures the email log for IP/MAC binding violations. After you have issued
the security address_filter ip_or_mac_binding enable_email_log command
to specify the IP version, you enter the security-config [ip-or-mac-binding] mode, and then
you can configure the email log setting.
ip_version IPv4 or IPv6 Specifies the type of IP address to which the
IP/MAC binding rule is applied:
• IPv4. You need to issue the ip_address
keyword and specify an IPv4 address.
• IPv6. You need to issue the ip_address6
keyword and specify an IPv6 address.
ip_address ipaddress The IPv4 address to which the IP/MAC binding
rule is applied.
ip_address6 ipv6-address The IPv6 address to which the IP/MAC binding
rule is applied.
log_dropped_packets Y or N Enables or disables logging for the IP/MAC
binding rule.
Format security address_filter ip_or_mac_binding delete <row id>
Mode security
Step 1 Format security address_filter ip_or_mac_binding enable_email_log
{IPv4 | IPv6}
Mode security
Step 2 Format enable_email_logs {Y | N}
Mode security-config [ip-or-mac-binding]
Keyword Associated Keyword to
Select or Parameter to Type
Description
To Next Page
Loading...
