NETGEAR ProSAFE SRX5308 - Page 171

Security Mode Configuration Commands
171
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Command example:
SRX5308> security address_filter ip_or_mac_binding add
security-config[ip-or-mac-binding]> name PhoneConfRoom52
security-config[ip-or-mac-binding]> mac_address d1:e1:55:54:8e:7f
security-config[ip-or-mac-binding]> ip_version IPv4
security-config[ip-or-mac-binding]> ip_address 192.151.1.107
security-config[ip-or-mac-binding]> log_dropped_packets N
security-config[ip-or-mac-binding]> save
Related show command: show security address_filter ip_or_mac_binding setup
security address_filter ip_or_mac_binding edit <row id>
This command configures an existing IP/MAC binding rule. After you have issued the
security address_filter ip_or_mac_binding edit command to specify the row
to be edited, you enter the security-config [ip-or-mac-binding] mode, and then you can
configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer. You cannot change the name of the rule.
ip_address6 ipv6-address The IPv6 address to which the IP/MAC binding
rule is applied.
log_dropped_packets Y or N Enables or disables logging for the IP/MAC
binding rule.
Step 1 Format security address_filter ip_or_mac_binding edit <row id>
Mode security
Step 2 Format mac_address <mac address>
ip_version {IPv4 {ip_address <ipaddress>} | IPv6 {ip_address6
<ipv6-address>}}
log_dropped_packets {Y | N}
Mode security-config [ip-or-mac-binding]
Keyword Associated Keyword to
Select or Parameter to Type
Description
mac_address mac address The MAC address to which the IP/MAC binding
rule is applied.
Keyword Associated Keyword to
Select or Parameter to Type
Description