NETGEAR ProSAFE SRX5308 - Configure Other Firewall Features; Attack Checks

Security Mode Configuration Commands
170
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security address_filter mac_filter source delete <row id>
This command deletes a MAC address from the MAC address table by deleting its row ID.
Related show command: show security address_filter mac_filter setup
security address_filter ip_or_mac_binding add
This command configures a new IP/MAC binding rule. After you have issued the security
address_filter ip_or_mac_binding add command, you enter the
security-config [ip-or-mac-binding] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
Format security address_filter mac_filter source delete <row id>
Mode security
Step 1 Format security address_filter ip_or_mac_binding add
Mode security
Step 2 Format name <rule name>
mac_address <mac address>
ip_version {IPv4 {ip_address <ipaddress>} | IPv6 {ip_address6
<ipv6-address>}}
log_dropped_packets {Y | N}
Mode security-config [ip-or-mac-binding]
Keyword Associated Keyword to
Select or Parameter to Type
Description
name rule name The name (alphanumeric string) of the IP/MAC
binding rule.
mac_address mac address The MAC address to which the IP/MAC binding
rule is applied.
ip_version IPv4 or IPv6 Specifies the type of IP address to which the
IP/MAC binding rule is applied:
• IPv4. You need to issue the ip_address
keyword and specify an IPv4 address.
• IPv6. You need to issue the ip_address6
keyword and specify an IPv6 address.
ip_address ipaddress The IPv4 address to which the IP/MAC binding
rule is applied.