NETGEAR ProSAFE SRX5308 - Page 18

Overview of the Configuration Commands
18
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
ipv6_tunnel
(continued)
net ipv6_tunnel isatap edit <row id> Configure an existing IPv6 ISATAP tunnel.
net ipv6_tunnel six_to_four configure Enable or disable automatic (6to4) tunneling.
lan
net lan dhcp reserved_ip configure
<mac address>
Bind a MAC address to an IP address for
DHCP reservation or change an existing
binding, and assign a LAN group.
net lan dhcp reserved_ip delete
<mac address>
Delete the binding of a MAC address to an IP
address.
net lan ipv4 advanced configure Configure advanced LAN settings such as the
MAC address for VLANs and ARP broadcast.
net lan ipv4 configure <vlan id> Configure a new or existing VLAN.
net lan ipv4 default_vlan Configure the default VLAN for each port.
net lan ipv4 delete <vlan id> Delete a VLAN.
net lan ipv4 disable <vlan id> Disable a VLAN.
net lan ipv4 enable <vlan id> Enable a VLAN.
net lan ipv4 multi_homing add Configure a new secondary IPv4 address.
net lan ipv4 multi_homing delete <row id> Delete a secondary IPv4 address.
net lan ipv4 multi_homing edit <row id> Configure an existing secondary IPv4
address.
net lan ipv4 traffic_meter configure
<ip address>
Configure a traffic meter profile for an IPv4
address.
net lan ipv4 traffic_meter delete <row id> Delete a traffic meter profile.
net lan ipv6 configure Configure the IPv6 LAN address settings and
DHCPv6.
net lan ipv6 multi_homing add Configure a new secondary IPv6 address.
net lan ipv6 multi_homing delete <row id> Delete a secondary IPv6 address.
net lan ipv6 multi_homing edit <row id> Configure an existing secondary IPv6
address.
net lan ipv6 pool add Configure a new IPv6 LAN DHCP address
pool.
net lan ipv6 pool delete <row id> Delete an IPv6 LAN DHCP address pool.
net lan ipv6 pool edit <row id> Configure an existing IPv6 LAN DHCP
address pool.
net lan ipv6 prefix_delegation add Configure a new prefix for IPv6 LAN prefix
delegation.
Table 7. Net mode configuration commands (continued)
Submode Command Name Purpose