NETGEAR ProSAFE SRX5308 - Page 19

Overview of the Configuration Commands
19
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
lan
(continued)
net lan ipv6 prefix_delegation delete <row id> Delete a prefix for IPv6 LAN prefix delegation.
net lan ipv6 prefix_delegation edit <row id> Configure an existing prefix for IPv6 LAN
prefix delegation.
net lan lan_groups edit <row id>
<new group name>
Change an existing LAN default group name.
protocol binding
net protocol_binding add Configure a new protocol binding.
net protocol_binding delete Delete a protocol binding.
net protocol_binding disable Disable a protocol binding.
net protocol_binding edit <row id> Configure an existing protocol binding.
net protocol_binding enable Enable a protocol binding.
qos
net qos configure Configure the QoS mode for the WAN
interfaces.
net qos profile add Configure a new WAN QoS profile.
net qos profile delete <row id> Delete a WAN QoS profile.
net qos profile disable <row id> Disable a WAN QoS profile.
net qos profile edit <row id> Configure an existing WAN QoS profile.
net qos profile enable <row id> Enable a WAN QoS profile.
radvd
net radvd configure dmz Configure the IPv6 RADVD for the DMZ.
net radvd configure lan Configure the IPv6 RADVD for the LAN.
routing
net routing dynamic configure Configure RIP and the associated MD5 key
information.
net routing static ipv4 configure <route name> Configure a new or existing IPv4 static route.
net routing static ipv4 delete <route name> Delete an IPv4 static route.
net routing static ipv4 delete_all Delete all IPv4 routes.
net routing static ipv6 configure <route name> Configure a new or existing IPv6 static route.
net routing static ipv6 delete <route name> Delete an IPv6 static route.
net routing static ipv6 delete_all Delete all IPv6 routes.
siit
net siit configure Configure Stateless IP/ICMP Translation
Table 7. Net mode configuration commands (continued)
Submode Command Name Purpose