NETGEAR ProSAFE SRX5308 - Page 21

Overview of the Configuration Commands
21
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
bandwidth
security bandwidth profile add Configure a new bandwidth profile.
security bandwidth profile delete <row id> Delete a bandwidth profile.
security bandwidth profile edit <row id> Configure an existing bandwidth profile.
security bandwidth enable_bandwidth_profiles
{Y | N}
Enable or disable bandwidth profile
globally.
content_filter
security content_filter block_group disable Remove content filtering from groups.
security content_filter block_group enable Apply content filtering to groups.
security content_filter blocked_keywords add Configure a new blocked keyword.
security content_filter blocked_keywords delete
<row id>
Delete a blocked keyword.
security content_filter blocked_keywords edit
<row id>
Configure an existing blocked keyword.
security content_filter content_filtering configure Configure web content filtering.
security content_filter trusted_domain add Configure a new trusted domain.
security content_filter trusted_domain delete
<row id>
Delete a trusted domain.
security content_filter trusted_domain edit
<row id>
Configure an existing trusted domain.
firewall
security firewall advanced algs Configure SIP support for the ALG.
security firewall attack_checks configure ipv4 Configure WAN and LAN security attack
checks for IPv4 traffic.
security firewall attack_checks configure ipv6 Configure WAN security attack checks
for IPv6 traffic.
security firewall attack_checks igmp configure Enable or disable multicast pass-through
for IPv4 traffic.
security firewall attack_checks
vpn_passthrough configure
Configure VPN pass-through for IPv4
traffic.
security firewall ipv4 add_rule dmz_wan
inbound
Configure a new IPv4 DMZ WAN
inbound firewall rule.
security firewall ipv4 add_rule dmz_wan
outbound
Configure a new IPv4 DMZ WAN
outbound firewall rule.
security firewall ipv4 add_rule lan_dmz inbound Configure a new IPv4 LAN DMZ inbound
firewall rule.
security firewall ipv4 add_rule lan_dmz
outbound
Configure a new IPv4 LAN DMZ
outbound firewall rule.
Table 8. Security mode configuration commands (continued)
Submode Command Name Purpose