NETGEAR ProSAFE SRX5308 - Page 22

Overview of the Configuration Commands
22
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
firewall
(continued)
security firewall ipv4 add_rule lan_wan inbound Configure a new IPv4 LAN WAN
inbound firewall rule.
security firewall ipv4 add_rule lan_wan
outbound
Configure a new IPv4 LAN WAN
outbound firewall rule.
security firewall ipv4 default_outbound_policy
{Allow | Block}
Configure the default outbound policy for
IPv4 traffic.
security firewall ipv4 delete <row id> Delete an IPv4 firewall rule.
security firewall ipv4 disable <row id> Disable an IPv4 firewall rule.
security firewall ipv4 edit_rule dmz_wan
inbound <row id>
Configure an existing IPv4 DMZ WAN
inbound firewall rule.
security firewall ipv4 edit_rule dmz_wan
outbound <row id>
Configure an existing IPv4 DMZ WAN
outbound firewall rule.
security firewall ipv4 edit_rule lan_dmz inbound
<row id>
Configure an existing IPv4 LAN DMZ
inbound firewall rule.
security firewall ipv4 edit_rule lan_dmz
outbound <row id>
Configure an existing IPv4 LAN DMZ
outbound firewall rule.
security firewall ipv4 edit_rule lan_wan inbound
<row id>
Configure an existing IPv4 LAN WAN
inbound firewall rule.
security firewall ipv4 edit_rule lan_wan
outbound <row id>
Configure an existing IPv4 LAN WAN
outbound firewall rule.
security firewall ipv4 enable <row id> Enable an IPv4 firewall rule.
security firewall ipv6 configure Configure a new IPv6 firewall rule.
security firewall ipv6 default_outbound_policy
{Allow | Block}
Configure the default outbound policy for
IPv6 traffic.
security firewall ipv6 delete <row id> Delete an IPv6 firewall rule.
security firewall ipv6 disable <row id> Disable an IPv6 firewall rule.
security firewall ipv6 edit <row id> Configure an existing IPv6 firewall rule.
security firewall ipv6 enable <row id> Enable an IPv6 firewall rule.
security firewall session_limit configure Configure global session limits.
security firewall session_settings configure Configure global session time-outs.
porttriggering_rules
security porttriggering_rules add Configure a new port triggering rule.
security porttriggering_rules delete <row id> Delete a port triggering rule.
security porttriggering_rules edit <row id> Configure an existing port triggering rule.
Table 8. Security mode configuration commands (continued)
Submode Command Name Purpose