NETGEAR ProSAFE SRX5308 - Page 242

VPN Mode Configuration Commands
242
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Related show command: show vpn sslvpn users users
vpn sslvpn users users login_policies <row id>
This command configures the login policy for a user. The command is not limited to SSL VPN
users. After you have issued the vpn sslvpn users users login_policies
command to specify the row ID that represents the user, you enter the
vpn-config [user-login-policy] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Command example:
SRX5308> vpn sslvpn users users login_policies 4
vpn-config[user-login-policy]> deny_login_from_wan_interface N
vpn-config[user-login-policy]> disable_login N
vpn-config[user-login-policy]> save
Related show command: show vpn sslvpn users users and show vpn sslvpn users login_policies
<row id>
vpn sslvpn users users ip_policies configure <row id>
This command configures source IP addresses from which a user is either allowed or denied
access. The command is not limited to SSL VPN users. After you have issued the vpn
sslvpn users users ip_policies configure command to specify the row ID that
represents the user, you enter the vpn-config [user-ip-policy] mode, and then you can
Step 1 Format vpn sslvpn users users login_policies <row id>
Mode vpn
Step 2 Format deny_login_from_wan_interface {Y | N}
disable_login {Y | N}
Mode vpn-config [user-login-policy]
Keyword Associated Keyword
to Select
Description
deny_login_from_wan_interface Y or N Enables or disables login from the WAN
interface.
disable_login Y or N Enables or disables login from any interface.