NETGEAR ProSAFE SRX5308 - Page 56

Net Mode Configuration Commands
56
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Command example:
SRX5308> net lan ipv4 configure 4
net-config[lan-ipv4]> profile_name Marketing
net-config[lan-ipv4]> port_membership port 1 Y
net-config[lan-ipv4]> port_membership port 3 Y
net-config[lan-ipv4]> port_membership port 4 Y
dhcp mode None, DHCP-Server, or
DHCP-Relay
Specifies the DHCP mode for the devices that
are connected to the VLAN:
• None. The DHCP server is disabled. No further
DHCP configuration is required.
• DHCP-Server. Configure the keywords and
parameters in the DHCP server section of this
table.
• DHCP-Relay. Configure the keywords and
parameters in the DHCP relay section of this
table.
proxy dns_enable Y or N Enables or disables the LAN DNS proxy.
inter_vlan_routing Y or N Enables or disables inter-VLAN routing.
DHCP Server
dhcp domain _name domain name The FQDN or domain name of the DHCP server.
dhcp start_address ipaddress The start IP address for the DHCP address
range.
dhcp end_address ipaddress The end IP address for the DHCP address
range.
dhcp primary_dns ipaddress The IP address of the primary DNS server for the
DHCP server.
dhcp secondary_dns ipaddress The IP address of the secondary DNS server for
the DHCP server.
dhcp wins_server ipaddress The IP address of the WINS server for the DHCP
server.
dhcp lease_time hours The DHCP lease time in hours.
enable_ldap Y or N Enables or disables LDAP.
ldap_serverip ipaddress The IP address of the LDAP server.
ldap_search_base search base The search base (string) for LDAP
ldap_port number The port number for the LDAP server.
DHCP Relay
dhcp relay_gateway ipaddress The IP address of the DHCP relay gateway.
Keyword (might consist of
two separate words)
Associated Keyword to
Select or Parameter to Type
Description