Net Mode Configuration Commands
92
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Related show command: show net qos setup
net qos profile delete <row id>
This command deletes a WAN QoS profile by deleting its row ID.
Related show command: show net qos setup
net qos profile disable <row id>
This command disables a WAN QoS profile by specifying its row ID.
Related show command: show net qos setup
priority Low or High Specifies the priority queue that
determines the allocation of bandwidth:
• Low. All services that are assigned a
low-priority queue share 10 percent of
interface bandwidth.
• High. All services that are assigned a
high-priority queue share 60 percent of
interface bandwidth.
Note: By default, all services are
assigned the medium-priority queue in
which they share 30 percent of the
interface bandwidth.
Format net qos profile delete <row id>
Mode net
Format net qos profile disable <row id>
Mode net
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
To Next Page
Loading...
