NETGEAR ProSAFE SRX5308 - Page 91

Net Mode Configuration Commands
91
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
bandwidth_allocation Shared or Individual Specifies how bandwidth is allocated.
These options apply when the hosts
keyword is set to IP-Address-Range or
to group.
• Shared. The bandwidth is shared
among all IP addresses in a range or all
members of a group.
• Individual. The bandwidth is allocated
to each IP address in the range or each
member of a group.
outbound_min_bandwidth bandwidth The outbound minimum bandwidth in
Kbps, from 0 to 100,000. This option
applies when the
direction_for_rate_control
keyword is set to outbound or both.
outbound_max_bandwidth bandwidth The outbound maximum bandwidth in
Kbps, from 100 to 100,000. This option
applies when the
direction_for_rate_control
keyword is set to outbound or both.
inbound_min_bandwidth bandwidth The inbound minimum bandwidth in Kbps,
from 0 to 100,000. This option applies
when the
direction_for_rate_control
keyword is set to inbound or both.
inbound_max_bandwidth bandwidth The inbound maximum bandwidth in
Kbps, from 100 to 100,000. This option
applies when the
direction_for_rate_control
keyword is set to inbound or both.
Priority profile settings
direction_for_priority Inbound-Traffic or
Outbound-Traffic
Specifies the direction to which the priority
queue is applied:
• Inbound-Traffic. The priority queue is
applied to inbound traffic only.
• Outbound-Traffic. The priority queue is
applied to outbound traffic only.
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description