102 – Faxing
CX2731 MFP Basic User’s Guide
4 Press the down arrow key repetitively to scroll to an entry
number, then press <OK>.
Note
You cannot select an entry which is specified as a reserved fax
job or for the auto deliver function.
5 Make sure that [Edit] is selected, then press <OK>.
6 If necessary, specify an entry name.
a) Make sure that [Name] is selected, then press the right arrow
key.
b) Enter a name up to 24 characters.
c) Select [Done], then press <OK>.
7 Press the down arrow key repetitively to scroll to [Phone
Number], then press the right arrow key.
8 Enter a phone number up to 40 digits.
9 Select [Done], then press <OK>.
To Next Page
Loading...
