91 – Faxing
CX2731 MFP Basic User’s Guide
Printing the Sender Name
By default, the name you specified in [Sender ID] is printed (see the
Setup Guide supplied with your machine for more information on
setting the Sender ID).
For details on how to change the sender name to be used, refer to the
Advanced Use’s Guide at www.my.okidata.com.
Checking and Canceling Fax
Transmissions _______________
Canceling a Fax Transmission
You can cancel a job that is being transmitted as long as the message
indicating the job has been completed has not appeared.
To do so, press <STOP> on the control panel.
Canceling During a Real Time Transmission
While the “Scanning” Screen is Displayed
1 Press <STOP> on the control panel.
While the “Transmitting” Screen is Displayed
1 Press <FAX> on the control panel.
2 Make sure that [Fax] is selected, then press <OK> to open the
fax standby screen.
3 Press the down arrow key to select [Fax Job View/Cancel], then
press <OK>.
4 Make sure that the job being transmitted is selected, then press
<OK>.
5 Check the contents, then press the right arrow key.
6 Press the down arrow key to select [Delete], then press <OK>.
7 Press the left or right arrow key to select [Yes], then press
<OK>.
To Next Page
Loading...
Need help?
General
