80 – Copying
CX2731 MFP Basic User’s Guide
Adjusting Copy Density (Density)
You can adjust the copy density to darken light copies or lighten dark
copies.
1 Press the right arrow key to enter the [Change settings] menu.
2 Press the down arrow key repetitively to scroll to [Image
Settings], the press <OK>.
3 Press the down arrow key repetitively to scroll to [Density]. then
press
<OK>.
4 Press the down arrow key repetitively to scroll to the desired
value, then press
<OK>.
Note
0 is the standard value.
To darken the document image, select +1, +2 or +3.
To lighten the document image, select -1, -2 or -3.
Resetting Copy Settings
Auto Reset
All settings you configured for your copy job automatically return to
their default values if no operation is made for 3 minutes (the factory
default).
Note
To change the auto reset time see the Advanced User’s Guide at
www.my.okidata.com.
To Next Page
Loading...
