98 – Faxing
CX2731 MFP Basic User’s Guide
When Connected To An Answering Machine
(Ans/Fax Ready Mode)
When the machine is set to Ans/Fax Ready Mode, you can use an
answering machine and receive faxes automatically. You must
connect an external answering machine to use this mode. For
information on connecting an answering machine, see the Setup
Guide supplied with your machine.
Important!
Depending on the answering machine and the sender’s
machine, Ans/Fax Ready Mode may not operate correctly.
Receiving Faxes
The machine automatically starts fax reception.
Receiving Calls
The answering machine rings, the reply message starts, then it starts
recording a message.
When Using The Telephone Frequently
(Tel Ready Mode)
Tel Ready Mode is recommended if you often use the external
telephone connected to the machine.
Receiving Calls
The telephone starts ringing when it receives calls.
Receiving Faxes
The telephone starts ringing when it receives a signal.
1 Pick up the handset when the machine rings.
2 Press <Mono Start>, then put down the handset to receive
faxes.
To Next Page
Loading...
Need help?
General
